Surat, Gujarat, India.
-
-
-
Mon - Sat 10.00 am - 7.00 pm
LVL & runners
LVL & runners
Premium Ply LVL (Laminated Veneer Lumber) is a specially engineered plywood product that provides a high-performance and consistent alternative to steel and solid wood structural uses. Consistently proven for its structural stability, reliability & dimensional stability, Premium Ply LVL has repeatedly proven why it is the best choice for permanent solutions as a construction alternative.
Laminated Veneer Lumber is an engineered wood product manufactured by compressing multiple layers of select hardwood veneers. Premium Ply LVL consists of multiple plies of hardwood veneer, glued together with Phenolic Synthetic Resin adhesive and cross laid to maximise all strength parameters. Automatic glue spreader on core composer’s composed veneer ensures uniform glue application, absorption and retention. Veneer used in the production of Laminated Veneer Lumber is stacked together and bonded under heat and pressure by hot press of high capacity and strong adhesive to form a complete high-quality material. Being an engineered composite material, LVL overcomes the limitation of traditional wood products as it is both warp- and shrink- resistant.
Ever since LVL’s establishment as an excellent alternative to traditional material, it has never failed to inspire architects, designers, builders and end users. It is reliable, consistent and saves time and labour during construction, with an impressive visual appeal.
Our LVL is ideally suited to a wide range of light to heavy structural uses in both commercial and residential applications; including framing, rafters, joists, lintels, trusses, beams, formwork, and scaffold planks. Because of their high-performance characteristics, our LVL products can be used as suitable alternatives to steel, reinforced concrete, solid timber and finger-jointed wood.
Density
0.65 to 1.20 gm/cm3
Std. Thickness (mm)
25, 30, 35, 50, 55, 75 and more
Standard Sizes (mm)
2440, 2745, 3050 and 3200
Technical Specification
| Sr No. | Dimensions | ISI Requirements | Observed Values |
|---|---|---|---|
|
1. |
Length |
2440:+6 0 |
2442mm |
|
2. |
Width |
1220:+3 0 |
1222mm |
|
3. |
Thickness |
50mm |
49.50mm |
|
4. |
Squareness |
2 mm/1000 mm |
0.95mm |
|
5. |
Edge straightness |
2 mm/1000 mm |
0.50mm |
|
6. |
Workmanship & Finish |
Clause 7 |
Satisfactory |
|
Physical properties |
|||
|
7. |
Adhesion of plies (in dry state) |
Some adherent fiber distributed more or less uniformly |
Satisfactory |
|
8. |
In wet state after boiling 72hrs and cooling in water till room temp. |
do |
Satisfactory |
|
9. |
In micro organism dry state after mycological test |
do |
Satisfactory |
|
10. |
Modules of rupture |
50N/mm2 |
70.566 N/mm2 |
|
11. |
Modulus elasticity |
7500N/mm2 |
8255.28 N/mm2 |
|
12. |
Compressive strength parallel to grain |
Along - 35N/mm2 |
36.80 N/mm2 |
|
13. |
Compressive strength perpendicular to grain |
Along - 35N/mm2 Across - 50N/mm2 |
36.00 N/mm2
|
|
14. |
Horizontal shear |
Along - 6N/mm2 Across - 8N/mm2 |
7.05 N/mm2 9.00 N/mm2 |
|
15. |
Screw holding power |
Edge - 2300N Face - 2700N |
Screw: 3150 3250Nail: 1130 1440 |
|
16. |
Thickness swelling with in 2 hours water soaking |
(3% Max) With in 2 hours water soaking With in 24 hours water soaking |
0.42% Max 1.92% |
